International Shipping Terms and Definitions – Part 1

International Shipping Terms and Definitions – Part 1

Have you noticed when you talk to an international moving company that there is a unique set of terms and acronyms that are used in this industry? Sometimes it is confusing to compare apples to apples because you are not even sure what the international moving companies are talking about. Here are some terms to get you started understanding the terminology used for shipping. Packing seems to be a simple term, but it may be necessary to clarify even a simple term like this. Packing refers to putting items into a box or wrapping, covering or protecting furniture in some way. This term should not be confused with the word loading. Loading refers to taking packed items and loading them into the truck or container. Loading is included in the cost, but packing is always an optional, additional cost. Cubic Foot (CFT or CF) is a unit of measure for volume (1 foot L x 1 foot H x 1 foot W) Volume is measured by the Length x Height x Width in feet of an item or group of items. Cubic Meter (CBM or CM) is a unit of measure for volume HHG is the acronym for household goods. You can ship your belongings in an FCL (full container load) shipment or an LCL (less than container load) shipment. An FCL shipment means you are taking either a 20 FT, 40 FT Standard or 40 FT HC (high cube) container for your shipment and your shipment only. This is also known as a designated container. The 20 FT and 40 FT Standard are the most commonly used containers. They are the most economical and readily available. A 20 FT container will comfortably hold 900 CFT of household goods or one standard vehicle and approximately 200-300 CFT of household goods. The interior dimensions are 7’8″ Wide x 7’10” High x 19’4″ Long and if it was filled with sand or water would hold 1161 CFT. The 40 FT STD (standard) container will comfortably hold 1800 CFT of household goods or one standard size vehicle and approximately 900 CFT of household goods. The interior dimensions are 7’8″ Wide x 7’10” High x 39’6″ Long and it was filled with sand or water would hold 2372 CFT. The term “self load” means that you load the packed items into the container yourself. Many of the ship lines no longer release containers to private residences. Many of the trucking companies that carry the containers from ship line’s container yard to the pick up location no longer will go to private residences due to insurance restrictions. For these reasons, the trend is to pick up your belongings in a truck, bring them to the warehouse and load the container at the warehouse. The containers belong to the ship line. The containers are not for storage. You can store the contents of the container but you cannot store the contents in the container. The container sits on a chassis with wheels that is about 4 feet above the ground. The container does not come with a ramp or lift gate (like a moving truck) so if you were thinking about the self load option, this alone would be a reason not to even consider it. At the warehouse, a loading dock, ramp or forklift is used to load the items into the container. An LCL shipment means your shipment will be loaded into a shared or consolidated container with other shipments. Your LCL shipment will either be palletized or put in a lift van to keep it separate from the other shipments in the container. When your shipment is palletized, the items are placed on a treated, wooden pallet (a platform without sides). The wood is treated to satisfy requirements in all countries. The items are then shrink wrapped (polyethylene or similar material heat treated and shrunk into an envelope around the items) to the pallet to secure them for shipping. A lift van is a treated, wooden crate that is used when items will not travel well on a pallet. A lift van will generally hold approximately 200 CFT of household goods. The lift van and the pallet are easily moved from place to place by means of a forklift. Look for more shipping terms in another article. Armed with all this information you are now in a better position to understand the terms used in the international moving process, and negotiate all the more better with your international movers. Certified International Movers Over the years, IntlMOVE has built up relationships and partnered with a network of reputable Origin Agents, On-Land Transportation Professionals, other NVOCC, Ship Lines, Customs Brokers, Overseas Destination Agents and other Relocation Professionals

http://johnjo.articlealley.com/international-shipping-terms-and-definitions–part-1-932938.html

Points to Keep in Mind when Loading a Container

Points to Keep in Mind when Loading a Container

Transportation of goods is a risky task having n number of challenges associated to it. Along with adopting measures to prevent cargo thefts, manufacturers and shippers have to take care of laws and rules too. To maintain transparency in the entire system, all associated parties have agreed upon a set of laws and rules. These rules cater to different sets of activities like loading, shipping, and unloading too. Here, we will limit our discussion to security container loading guidelines only. Why Should I Follow Loading Guidelines? Transparency is fine but one might think why to follow all these guidelines. They look complicated and burdensome. But, actually they are not. By following these guidelines, you can stay away from unnecessary security checks and save time. Also, it prevents your goods from getting damaged during the transit. All in all, Cargo Security and Loading guidelines are for your benefit and you must follow them. Key Points to Remember when Loading a Container Here below we have mentioned the key points that should be kept in mind while loading a container. ·Even Distribution of Weight – Weight distribution is one of the biggest challenges with cargo loading. The items should be placed in such a manner that weight of the container is spread evenly. If required, you can plan the placement of goods inside the container in advance. Another point to remember is the weight of the cargo should not exceed payload of the container. ·Optimum Utilization of Space – Another issue that needs to be handled with care is optimum utilization of space. Shippers should devise a plan on how to place cargos. Instead of stacking boxes on one another, try to place them in such a manner that no space is left empty. Also, the boxes should be fixed in their respective positions so that they do not topple and get damaged during the transit. ·Cargo Compatibility – Lastly, shippers should take care of cargo compatibility. Depending on the type of items shipped, the cargos should be chosen. For instance, if the products being shipped are fragile, special types of straps should be used to keep boxes in place. If you are shipping something highly valuable then security systems should be installed properly. Similarly, guidelines can be checked for different types of goods to be shipped to different parts of the country. The points mentioned above are not exhaustive in nature. To view detailed guidelines for shipping containers readers are encouraged to take help of Internet. Author Bio:- John Peter is Internet marketing consultant of TrakLok Corporation, provides the Cargo security and Cargo Storage Container. Checkout traklok.com for more info Related Articles – Cargo security, Cargo Storage Container, Shipping Container Storage, Trailer Security System, Cargo Protection System, Email this Article to a Friend! Receive Articles like this one direct to your email box!Subscribe for free today!

http://www.amazines.com/Consumer/article_detail.cfm/5602179?articleid=5602179

Shipping Cargoes in Safety Through Storage Containers

Shipping Cargoes in Safety Through Storage Containers

It was back in the 18th century when storage containers where being employed to transport coal that is transported by wagons. And as the time passed by, these storage containers are used as cargo containers, drum containers, or shipping containers. In order for the goods to be properly delivered, shipping containers comes with large cargo containers and crates which is made from long lasting materials and stainless steel and reaches around twenty foot. You can check on some of the service providers or those freight and shipping companies that give a cheap storage containers for sale and used storage containers for sale. There is no another firm that is capable of sending loads of storage container containing significant things, goods, and merchandise other than shipping firms. Based on how heavy the cargo container is or how far it is sent, expenses can be overwhelming. This is essentially the reason why storage container for sale and used shipping containers for sale are needed to some companies. Container rentals are another choice that other businesses may pick. There should not be a reason for a company to miss checking out the overall condition of the item whenever considering picking cargo containers for sale. This will determine if the shipping container can make it through transportation hours under any climate conditions. On the other hand, when you’re planning for container rental, ensure you hire a reliable service provider that can secure your goods during transport and deliver them on time. If you’re fascinated concerning obtaining containers that can be used to carry aviation products and weapons, you can opt to have customized shipping containers for sale. In addition, there is also presented in the market exactly where you can buy shipping container that has temperature controlled technology and double/twin door containers. The requirement to verify on the merchant in considering either used shipping container for sale, buy shipping containers, or rent containers have to be followed, this is because of the fact that the goods which are necessary to be taken are valuable and some should be sent at a particular distance. Among the best ways to learn more will be if you head over to agree with. Related Articles – Art Transportation NY, NY Art Transportation, Art Transport NY, Email this Article to a Friend! Receive Articles like this one direct to your email box!Subscribe for free today!

http://www.amazines.com/Automotive/article_detail.cfm/5741396?articleid=5741396

Details about freight companies and services

Details about freight companies and services

Details about freight companies and services Freight companies that focus in the moving of goods transferring from one place to another place or country to country. The main focus of the task is handle things to deliver the product form one point to another point. There are thousands of freight companies in business worldwide they are moving the things by ship, train, aero plane. The freight companies are doing their job in international level the process can be done by simultaneously. They are transferring the goods with security purpose and controlling the damage then quickly sending the luggage to destination place. Some points of international freight companies: The international freight service is one better choice. It is important to know the people they have to see the options in order to select international freight services that will handle their items with safe or not. The type of transporter you choose may be different based on what are the things you sending and how fast you want it to catch there, because it is very important to get the items in safe manner and also have to fix the charge first. In international freight companies they have several options to transferring the items that is shipping, aero plane. In shipping company they were providing the better transporting to the business of import and export companies. The disadvantage is that it takes maximum than ordinary means of transportation delivery. Earlier than some older railways, use of well cars is most needed to take a large container. Shipping works are mainly used to transport the goods through sea way. Exporters and importers of merchandise usually make their option of transportation based on that is to say the location of the destination and also choose the arrangement of one or more of freight transport to get the goods from source to destination place. After that the cost is also comparing very low because most of the people send the goods in order to get air ways. Comparing to airways in ships to Trans port the goods is slow so most of the people are like to send the goods in air ways but cost is high. Each and every services is best but it contains a similar different all the service are doing the work same, but the time and cost is different from one another. This service is useful for all the people to get the goods safe and easy manner.Hi this is alexsmith from United States.You can call me as. we are providing international freight.We swear that our help will be best for you.It is precise useable use direct freight and international freight Related Articles – [warehousing], Email this Article to a Friend! Receive Articles like this one direct to your email box!Subscribe for free today!

http://www.amazines.com/Home_Improvement/article_detail.cfm/2587143?articleid=2587143

Logistics and customs clearance in Russia

Logistics and customs clearance in Russia

Logistics industry is one of the most affected sectors by economic and financial developments. The downward and upward movements of this industry seem to be dependent on the developments in the world trade in general and foreign trade in particular. In parallel with such trade developments, logistics industry displays an upward development and expansion as the world trade develops and foreign trade increases, and it records a downward movement together with contraction during the periods of contraction and crisis encountered in economy. After the crisis of 2008, a lot of problems appeared in the logistics sector. There was a sharp decline in transportation volumes in 2008 and not a year had to pass to change the situation. But by the end of 2011-2012, the number of shimpents increased again. For example, Russian imports were worth 26.8 Billion USD in June of 2012. Historically, from 1994 until 2012, Russian imports averaged 10.84 Billion USD reaching an all time high of 30.50 Billion USD in December of 2011 and a record low of 2.69 Billion USD in January of 1999 . Russia imports mostly vehicles, machinery and equipment, plastics, medicines, iron and steel, consumer goods, meat, fruits and semi finished metal products Russian exports were worth 40.8 Billion USD in June of 2012. Historically, from 1994 until 2012, Russian exports averaged 17.88 Billion USD reaching an all time high of 51.00 Billion USD in December of 2011 and a record low of 4.09 Billion USD in January of 1994. Metals and energy make up more than 80 percent of Russia’s exports. The country is the world’s largest oil producer and the biggest exporter of natural gas, nickel and palladium. According to the World Trade Organization, Russia’s exports by main destination points were as follows: 1. European Union (27) 58.7 2. China 5.2 3. Ukraine 5.0 4. Turkey 4.7 5. Belarus 4.3 Russian imports by origin are: 1. European Union (27) 44.6 2. China 9.4 3. Ukraine 6.7 4. Japan 5.7 5. Belarus 5.0 The total transport turnover in Russia increased by 3.4% – to 4.9 trillion ton-km. in 2011. According to Rosstat, Inland Water Transport achieved the highest rate for this indicator (13%). In general, during the navigation season of the last year 127.8 million tons of cargo were transported, it is almost 25% more than the navigation of previous years. It should be noted that sailors gained this result with great difficulty, as today is not the best time for the industry. In spite of the low cost of transportation, traffic volumes have decreased 3 times, due to worn-out fleet, poor infrastructure of inland waterways and the season influence on them. These circumstances are successfully exploited by competitors – rail and road transport. Vehicles, in turn, promptly compensate for the loss derived from the crisis. Cargo turnover in 2011 grew by 11.8%, to 222.8 billion ton-kilometers, carried 5.6 billion tons of cargo. According to the latest data of Rosstat the growth rate of freight cars has increased and now stands at 10.2%. This is also supported by the data of multimodal logistics companies in practice. So, for example, TLT GROUP, an international logistics company, points out that about 80% of all their freights are carried by trucks. Railroad transport shipped 1.24 billion tons of cargo in 2011, an increase by a modest 3%, which corresponds to the initial forecast of top managers of JSC “Russian Railways”. Transport by sea, according to Rosstat, is only a small part of the total volume of transported goods in Russia – 33.9 million tons in 2011. However, these figures don’t reflect the real picture of the market, as most of the sea merchant ships, even if they belong to the Russian carriers, are usually registered in the other countries. Foreign flag carriers are not included in statistics of the state bodies. In August, 2012, Russia accessed to WTO so this volumes can increase greatly in the next few years. Efforts for lifting the existing restrictions against Russian exports will start as early as this autumn. As of July 1, 2012, 19 countries (Australia, Azerbaijan, Armenia, Belarus, Brazil, India, Indonesia, Kyrgyzstan, China, South Korea, Mexico, Moldova, the USA, Thailand, Turkey, Turkmenistan, Uzbekistan, Ukraine, and the EU as a single customs territory) were implementing preventive measures against Russian goods. At the same time, one should not forget that conditions for accession to the WTO include actions to lower import customs duties, and limit State support for a number of sectors, which may result in a rise in the competitive power of foreign commodities. In general, after a transitional period for the liberalization of market access, which is 2-3 years, and for the most sensitive products 5-7 years, reducing the weighted average import tariff rates on industrial goods will be 3 percentage points, and on agricultural products 4.4 percentage points. About 30 percent of the rates will be reduced by no more than five percentage points. Among the three main advantages Russia will derive from joining the WTO is stability of foreign trade terms, a decrease in customs and administrative barriers, and the opportunity to participate in working out the rules of international economic cooperation,” said the official who led the Russian delegation at the WTO talks. The rates of duties on foreign-made medicines will be lowered from 15 to 6.5 – 5 percent during the transitional period and those on medical equipment and medicinal substances will be lowered at a priority rate (down to 2-3 percent). In the course of three years after accession, duties on computers, means of their production, and circuitry will be abolished. Duties on household electrical and electronic appliances will be lowered from 15 percent down to 7-9 percent. Acession to the WTO has to much change one of the most important parts of the logistics chain – the customs clearance process. Now customs procedures in Russia and other CIS countries are already undergoing signicant changes which aim to simplify and clarify the customs clearing process. Russia has adopted free trade agreements with countries of the Commonwealth of Independent States (CIS). Goods originating from CIS countries (e.g.Ukraine) are exempt from customs duty for import to Russia (subject to certain conditions). Russia, Belarus and Kazakhstan have formed a Customs Union, and goods moving within and between these countries are not subject to customs clearance. Relocation of customs clearance procedures to the borders, introduction of Electronic Controls, Unied Tariff and Unied Technical Requirements for Customs Union and other new practices are all designed to modernise customs systems and facilitate superior market access procedures. However, the speed of all these changes is leading to failures in quality assurance and causing signicant disruption. So there are still many formalities in the process of customs clearance in Russia. How does this process look like? At first when you decide to clear your shipment you have to do all pre-customs formalities. Customs formalities in Russia are governed by the Customs Code of Russian Federation. Every incoming shipment undergoes 5 stages of customs control: •Declaration (freight is registered, documents accepted by customs official) •Documentary verification (papers are checked and actual shipment is verified against accompanying documents) •Monetary control (the declared value of shipment is proven and customs duties are debited from consignee’s account) •Physical check of the freight (not necessarily 100% must be checked by the inspector, normally it is a visual check or a spot-check) •Goods release (final stamp is put on the AWB and the customer has the right to pick up the shipment from the warehouse) In addition to it, Customs Code of the Russian Federation states that customs clearance cannot be completed without the finalization of the following kinds of control: •Sanitary-epidemiological control; •Obligatory certification; •Veterinary control; •Other kinds of import or export control in Russia if the goods are subject to that kind of control. Shipments need to have a specific consignee in Russia and this entity should be listed on the Waybill. If the consignee is a legal entity, it must be registered with Russian customs at the post where the shipment is cleared. Russian laws may override the seller’s responsibilities in some types of sales contracts by requiring that the consignee pay for customs clearance and import duties. Not all the companies have possibilities to become participants of the foreign-economic activity because of huge expenses for qualified personnel and opening of special department. So some logistics companies that provide full logistics services offer the possibility on behalf of a company to clear the goods through the customs. According to Russian legislature customs clearance cannot last longer than 3 days. Any formal delay requires an explanation in written form, which would be the ground for suing the guilty party for the compensation of the financial losses incurred. Customs clearance process in Russia is considerably different than that in most of the other countries. Buyer and Seller or their nominated customs broker have to prepare a huge list of miscellaneous documents, differing each time depending on the nature of the goods, type of customs mode, place of clearance and many other factors. But the first and one of the main documents is a Declaration form (called “GTD” in Russia). You should have it for all types of goods. It is important to know some facts about it. Import Declaration Form is handed in no later than 15 days after the submission of goods to the customs bodies at the point of their entrance into the Russian customs territory or the day after the closing of internal transit customs regime if the declaration process takes place away from the point of the goods’ entrance. Export Declaration Form is submitted before the goods leave Russia. Submission of a Declaration Form is closed at the moment when the customs bodies accept the Form. The moment the Form is accepted, it becomes a document having legal force; the customs bodies accept the submitted Form the same day they receive it. Although most products can freely be imported into and exported from Russia, some products such as pesticides, weapons, self-defence items, explosives, precious metals and stones, radioactive materials, narcotics and psychotropic substances require a license. For all other products, customs regulations and tariffs are one of the first and main concerns for companies doing business in the Russian Federation. Goods must be declared upon import to Russia in accordance with the customs regime selected (e.g. import for internal consumption, temporary import, etc.) As a rule the goods are declared by the Russian importer or a customs broker. When the goods cross the Russian border the carrier submits to the border authorities basic documentation on the goods. Following this, internal transit of the goods continues on under customs control to the customs terminal at the final destination where they are cleared through customs. The main documents are the following: – Cargo customs declaration (CCD): The CCD is a uniform document used to declare the goods to Customs and contains basic information on the goods (description, weight, number of units, etc.), the customs regime selected, the importer, consignor and consignee, the class and customs value of the goods, their country of origin and the transportation of the goods. – Declaration of customs value: This document confirms the value of the goods and serves as a basis for the calculation of the customs payments. There are various methods to calculate the customs value, and Customs may request additional documentation depending on the method used. The customs value includes the cost of transport. – Transportation documents: These depend on the type of transport (road, rail, air, sea): bill of lading, FIATA bill of lading (combined transport bill of lading), railway bill, airway bill, truck waybill (CMR). – Commercial documents: The commercial documents (contract, commercial invoice, pro forma invoice, insurance certificate, etc.) are important for the calculation of the customs value. – Certificate of origin: A certificate of origin is required to benefit from preferential customs tariffs. Certificates of origin are issued by special institutions in the country of the manufacturer. List of Customs Clearance Risks Here we sum up the most common mistakes taking place during the customs clearance of goods and services in Russia. Having read that, you could avoid additional time and financial losses on the Russian border: •Data difference in the electronic notification, received from the forwarding customs toll as well as shipping documents with the one declared in the Declaration Form[1] if that difference leads to the reduction of the customs fees and taxes due; •Declaration of goods, shipped in several auto vehicles, rail wagons or containers, in the same declaration form (with the exception of the liquid and poured goods, shipped in rail wagons with an open top); •Declaration of the same lot* of goods, shipped in the same auto vehicle, rail wagon or container in different declaration forms. (splitting a solid lot of goods); •Application for customs clearance at the customs bodies, which are different from the ones, stated in the shipping documentation; •Contradicting information on the goods weight, names, value and origin in the shipping documents; •Correction marks in the shipping documents, which had not been notarized as proper; •Lack of one of the documents, needed for customs clearance; •The receiver of the goods is subject to a number of customs orders on the violation of customs procedures; •Declaration of goods, which belong to the so called “risk or hide groups”** (customs authorities submit the lists) as well as second hand products no matter what volume of them is declared for the same auto vehicle, rail wagon or container; •Lack of registration card, given to a participant of foreign economic activities; •Significant difference between gross and net weight (more than 20%), shipped in the same auto vehicle, rail wagon or container. * As the same lot one should consider the goods, sent to the same addressee on the same vehicle, according to the same customs control documentation. ** Hide groups consist of both expensive and cheap products with further declaration of the cheap part only, which leads to the reduction of customs fees and taxes for the expensive ones and the whole lot as a result of it. Summing up, logistics is a steadily developing industry, and following the statistics forecasts, the number of shipments will grow constantly over the next years. We expect overall reduction of trade barriers for goods and services due to Russia’s WTO accession and simplification of the existing system. As for now, one should be aware of a certain specific character of the Russian customs system, which is often rated as very difficult and having many formalities. Speaking of projects dealing in imports of sophisticated high-tech equipment to Russia, it should be noted that their implementation is often a process that requires special attention. According to TLT GROUP’s observations, most of the investors and importers faced certain difficulties when importing such equipment to Russia due to the fact that they lacked necessary expertise on the process. Only by working carefully and attentively many problems can be prevented. Specialists of logistics companies can also help you, in this case you won’t need to study all the details.

http://tlt.articlealley.com/logistics-and-customs-clearance-in-russia-2434821.html